温馨提示：本站仅提供公开网络链接索引服务，不存储、不篡改任何第三方内容，所有内容版权归原作者所有
AI智能索引来源：http://www.mr2.com/forums/archive/index.php/t-95703.html
点击访问原文链接

WTB: Spare Gen 2 3SGTE Longblock [Archive] - Toyota MR2 Message Board

进入原网站 导航首页
WTB: Spare Gen 2 3SGTE Longblock [Archive] - Toyota MR2 Message Board Toyota MR2 Message Board > The Toyota MR2 Marketplace > MR2 Parts Department > MK 2 Parts Wanted > WTB: Spare Gen 2 3SGTE Longblock PDA

View Full Version : WTB: Spare Gen 2 3SGTE Longblock


eckoman_pdx10-05-2013, 12:41 AMI'm looking for a running spare Gen 2 long block in decent running condition. Not looking to spend a ton, I just have 2 spare E153 transmissions and I'd like a spare long block to go with them. Doesn't need to be a complete swap (in fact I'd rather it not be a complete swap since it's not needed), I just need the long block.

I'm not looking to spend a lot. I don't mind local pickup, or even non-local pick-up. I may be willing to drive down in Nor Cal, up into Northern Washington or out towards Idaho or further if the price is right.

I am located in Portland, Oregon but as I said I am willing to drive to pick one up. If you have something, please let me know. canadam10-06-2013, 04:03 AMJames,
I have a good JDM Gen II with ~122,000 kms on it that I'm looking to let go for cheap to make space in the garage.
What's the chances you have a Vancouver run in your system? I'm 500 miles from there, but it'd be the only way to get it south cheap. Once you cross the border things get much more pricey.
-Adam canadam10-06-2013, 04:03 AMJames,
I have a good JDM Gen II with ~122,000 kms on it that I'm looking to let go for cheap to make space in the garage.
What's the chances you have a Vancouver run in your system? I'm 500 miles from there, but it'd be the only way to get it south cheap. Once you cross the border things get much more pricey.
-Adam drake2210-06-2013, 10:33 AMI'm looking for a running spare Gen 2 long block in decent running condition. Not looking to spend a ton, I just have 2 spare E153 transmissions and I'd like a spare long block to go with them. Doesn't need to be a complete swap (in fact I'd rather it not be a complete swap since it's not needed), I just need the long block.

I'm not looking to spend a lot. I don't mind local pickup, or even non-local pick-up. I may be willing to drive down in Nor Cal, up into Northern Washington or out towards Idaho or further if the price is right.

I am located in Portland, Oregon but as I said I am willing to drive to pick one up. If you have something, please let me know.

I have a block, crankshaft (still attached to good rods with good 5k mile bearings), pistons, rods, and everything for a cylinder head except the head block near Seattle, WA. Ill be down in your neck of the woods once or twice this month.

Sent from my HTC6500LVW using Tapatalk 4 eckoman_pdx10-06-2013, 04:56 PMJames,
I have a good JDM Gen II with ~122,000 kms on it that I'm looking to let go for cheap to make space in the garage.
What's the chances you have a Vancouver run in your system? I'm 500 miles from there, but it'd be the only way to get it south cheap. Once you cross the border things get much more pricey.
-Adam

Adam,

I'm definitely interested! My wife and I were actually considering to go up into Victoria sometime in mid-December for Christmas, but this Government shutdown thing has that in limbo since we have to get our passports and it's more problematic with the government shut down. I have no problem driving up right up to boarder in Blaine, WA if you can meet me there, I just can't cross into Canada until I get a passport. Let me know if that's doable for you. Blaine is about 30 miles south of Vancouver. I'm not sure how much more pricey it gets for you to meet in Blaine vs Vancouver, BC though.


I have a block, crankshaft (still attached to good rods with good 5k mile bearings), pistons, rods, and everything for a cylinder head except the head block near Seattle, WA. Ill be down in your neck of the woods once or twice this month.

Sent from my HTC6500LVW using Tapatalk 4

Hmm, sounds like it's the short block? The everything from the block (bottom half) with no cylinder head? canadam10-06-2013, 05:59 PMAdam,

I'm definitely interested! My wife and I were actually considering to go up into Victoria sometime in mid-December for Christmas, but this Government shutdown thing has that in limbo since we have to get our passports and it's more problematic with the government shut down. I have no problem driving up right up to boarder in Blaine, WA if you can meet me there, I just can't cross into Canada until I get a passport. Let me know if that's doable for you. Blaine is about 30 miles south of Vancouver. I'm not sure how much more pricey it gets for you to meet in Blaine vs Vancouver, BC though.



James I was going to ship to the border, I'll be driving to Vancouver next week, but in a car and I can't bring the motor.
Adam Powered by vBulletin® Version 4.2.5 Copyright © 2026 vBulletin Solutions Inc. All rights reserved.

智能索引记录