温馨提示:本站仅提供公开网络链接索引服务,不存储、不篡改任何第三方内容,所有内容版权归原作者所有
AI智能索引来源:http://www.mr2.com/forums/archive/index.php/t-80517.html
点击访问原文链接

NEED TO BUY: cylinder lock for 94+ [Archive] - Toyota MR2 Message Board

NEED TO BUY: cylinder lock for 94+ [Archive] - Toyota MR2 Message Board Toyota MR2 Message Board > The Toyota MR2 Marketplace > MR2 Parts Department > MK 2 Parts Wanted > NEED TO BUY: cylinder lock for 94+ PDA

View Full Version : NEED TO BUY: cylinder lock for 94+


vankykhang06-01-2012, 01:24 PMWell I need to buy a new cylinder lock. My trunk is stuck closed because I took the old one off and didn't put it back on after I got done with the kouki light conversion. Still gotta cut it open now :P. Just want a cheap working one. arber021406-01-2012, 01:42 PMWhy don't you take the car to a locksmith and see if they can open the trunk for you? vankykhang06-01-2012, 02:25 PMWhy don't you take the car to a locksmith and see if they can open the trunk for you?

I didn't put my cylinder lock back on, so the lever doesn't work anymore. Trunk won't open. Can a locksmith still open that? arber021406-01-2012, 02:29 PMI didn't put my cylinder lock back on, so the lever doesn't work anymore. Trunk won't open. Can a locksmith still open that?

Give them a call den62106-01-2012, 02:30 PMSame thing happen to me. I ended up removing the muffler and cut a big hole under the trunk to get the lid open. After you get lid open, then you can just reweld it back. vankykhang06-01-2012, 03:00 PMGive them a call

I'll give them a call and see what they can do. Thanks guys. DB806-01-2012, 11:24 PMUmmm...........

First things first, your trunk release cable is still attach??

you should still be able to reach it with an angle piler or something, pull that little wire and that should open the trunk. Good luck

and I do have a 94+ lock cylinder (new with two keys).

$50 USD shipped

Paypal: chriskwwong@netvigator.com

http://i89.photobucket.com/albums/k217/Rexchris66/MR2_SW20%20Parts/Kouki%20Tail/IMG_5283.jpg 780GTS06-01-2012, 11:34 PMThis happened to me too all you need is a coat hanger and you gotta go in from a side hole and get hooked on to the rod that connects to the latch and yank it vankykhang06-02-2012, 12:03 AMUmmm...........

First things first, your trunk release cable is still attach??

http://i89.photobucket.com/albums/k217/Rexchris66/MR2_SW20%20Parts/Kouki%20Tail/IMG_5283.jpg

Will be getting that cylinder lock asap. And yes it is. just the old cylinder lock is taken off with whatever cables attached to it. THANKS A LOT!!!! vankykhang06-02-2012, 12:04 AMThis happened to me too all you need is a coat hanger and you gotta go in from a side hole and get hooked on to the rod that connects to the latch and yank it


Will be trying that also. THANKS. Gonna try w/e that works :D Powered by vBulletin® Version 4.2.5 Copyright © 2026 vBulletin Solutions Inc. All rights reserved.

智能索引记录