温馨提示：本站仅提供公开网络链接索引服务，不存储、不篡改任何第三方内容，所有内容版权归原作者所有
AI智能索引来源：http://www.mr2.com/forums/archive/index.php/t-50486.html
点击访问原文链接

Detailing your MR2 painting [Archive] - Toyota MR2 Message Board

进入原网站 导航首页
Detailing your MR2 painting [Archive] - Toyota MR2 Message Board Toyota MR2 Message Board > General and Racing Discussions > General Technical Discussion > Detailing your MR2 painting PDA

View Full Version : Detailing your MR2 painting


knightbird12303-12-2010, 04:10 PM.... donnyavery03-12-2010, 04:47 PMyou can just buy a quirt of black singlestage like shopline or something for like 40$ and spray it with a paint gun just sand to 220 then clean and prep with some adhesion promoter (need to do no matter if you spray-bomb or real paint or it WILL peel) then primer and sand to 400 then sealer and paint mmarookiejoe03-12-2010, 05:15 PMIs this for your stick-on hood scoop?

I DO NOT recommend using rattle-cans to paint exterior car parts. That being said, if you MUST do it, scuff the surface with 320 grit - wipe the part down with a tack cloth - wipe the part down with Duplicolor prep wipes - put on several THIN coats of primer/sealer - let the primer dry - lightly sand with 500 grit - wipe the part down with tack cloth - wipe the part down with the prep wipes - put on a few THIN coats of paint - let dry COMPLETELY - wet sand dry part with 1000 grit - clean part - buff/polish. TomsMR203-12-2010, 05:47 PMdont prime parts that are already painted. scuff and shoot, it'll last longer. scuff with 600 grit and just paint it.

if its raw fiberglass, scuff with 320 or 400 and spray with bulldog adhesion promotor, let dry, and paint. knightbird12303-12-2010, 07:08 PM.... Powered by vBulletin® Version 4.2.5 Copyright © 2026 vBulletin Solutions Inc. All rights reserved.

智能索引记录