温馨提示：本站仅提供公开网络链接索引服务，不存储、不篡改任何第三方内容，所有内容版权归原作者所有
AI智能索引来源：http://www.mr2.com/forums/archive/index.php/t-4672.html
点击访问原文链接

Mr2 hard lines and other uses [Archive] - Toyota MR2 Message Board

进入原网站 导航首页
Mr2 hard lines and other uses [Archive] - Toyota MR2 Message Board Toyota MR2 Message Board > Toyota Engine Clubs > V6 Owners Group > Mr2 hard lines and other uses PDA

View Full Version : Mr2 hard lines and other uses


Oteck03-15-2006, 02:00 AMThis mostly imply to MZ's but could work for vz aswell...

The brake booster line that goes from the pass strut tower to the firewall can be used for the coolant overflow line. It should end at the center firewall and get it closer rather than having the hose across the trunk wall. Since the Brake booster line is now disconnected it can now be directly be sent to the Throttle body which is also now closer too, From the firewall to the Driver side strut tower.

Now for the ODBII MZ's if your going to use the Walbro your going to cut up abit of the fuel tank assembly. the Tip is usable for this :)

http://bubu.mine.nu/oteck/3MZ-FE/fuel%20pipe.jpg

This is the new line for the check fill valve. It's better than finding the proper TEE fitting which i saw for over 40 usd. On the diagram it's the cyan line
http://bubu.mine.nu/oteck/3MZ-FE/Hoses/Evap.gif

Randy made a external "check fill valve" using abs plumbing stuff. I plan to Modify the stock mr2 canister to fit it. It already has a barb fitting under so it can connect to that ;) mr-355-5sfte03-15-2006, 09:57 AMQuality info Oteck.. how's your harness coming along? Powered by vBulletin® Version 4.2.5 Copyright © 2026 vBulletin Solutions Inc. All rights reserved.

智能索引记录