温馨提示：本站仅提供公开网络链接索引服务，不存储、不篡改任何第三方内容，所有内容版权归原作者所有
AI智能索引来源：http://www.mr2.com/forums/archive/index.php/t-45168.html
点击访问原文链接

side windows (behind door) [Archive] - Toyota MR2 Message Board

进入原网站 导航首页
side windows (behind door) [Archive] - Toyota MR2 Message Board Toyota MR2 Message Board > Toyota MR2 Generations > MK 2 MR2 - SW20 > MK2 Body Kits and Exterior Modifications > side windows (behind door) PDA

View Full Version : side windows (behind door)


como09-09-2009, 10:33 PMSo if any of you have been following, I went ahead and took my entire mk1 apart to paint it.

What I may not have mentioned, is that I've never so much as done an oilchange before... so I'm kinda making this up as I go.

I'll be needing to re-install those little triangle windows soon. What do I use to put them in? It was thick goopy stuff, reminded me of roofing tar. Where can I get it, and what's it called? MRH09-09-2009, 10:38 PMI would assume it is the same stuff that you would use to seal the oil pan. the dealership peeps usually call it Toyota sealant. I could be totally wrong on that one. I would assume it is something similar though.

-H como09-10-2009, 10:08 AMMy friend called it "Elephant snot", and someone else called it some sort of a silicone sealant. Thick, black disgusting stuff. I'll have to ask at napa when I'm there. donnyavery09-10-2009, 05:23 PMits windshield urethane adhesive 3M Urethane Windshield Adhesive , 10.5 fl oz Cartridge (http://www.levineautoparts.com/3murwiad10fl.html)this is all i use at work and never had a window come back(leaking or other) you can get it at a local paint supplier or some time autozone Archidamus-R10-07-2009, 01:49 PMGreat. How do you get that s*** off? Is there a good solvent? donnyavery10-07-2009, 02:05 PMjust clean the old glue off with a razorblade (the window and car) wipe clean with a little paint thinner on a rag and the use the primer on just the car and cut the tip for glue in a v shape then applied a 1/2 (thick and wide) bead of glue press window firmly into place and then use some masking tape to hold it till dry (make shour its where you wont it or you will have to cut it back out and do it again) you can donnyavery10-07-2009, 02:11 PMthis is a link i found of the some one glued a window vent its the but he
the skipped the primer (you have to use the prime or it WILL let loose) Google Image Result for http://img.photobucket.com/albums/v310/mvosborn/SilverHorse%20Louver%20Install/SilverHorseLouverInstall025800x600.jpg (http://images.google.com/imgres?imgurl=http://img.photobucket.com/albums/v310/mvosborn/SilverHorse%2520Louver%2520Install/SilverHorseLouverInstall025800x600.jpg&imgrefurl=http://mustangforums.com/forum/2005-2010-mustangs/502754-shr-louver-install-56k-death.html&usg=__-rOuPTVFypTXAYFY9F_S3tPysYU=&h=600&w=800&sz=97&hl=en&start=6&um=1&tbnid=UaiDmS7aBWj4gM:&tbnh=107&tbnw=143&prev=/images%3Fq%3Dwidow%2Bglue%2Btip%2Bcut%26hl%3Den%26 client%3Dfirefox-a%26rls%3Dorg.mozilla:en-US:official%26hs%3DMcH%26sa%3DN%26um%3D1) Powered by vBulletin® Version 4.2.5 Copyright © 2026 vBulletin Solutions Inc. All rights reserved.

智能索引记录