温馨提示：本站仅提供公开网络链接索引服务，不存储、不篡改任何第三方内容，所有内容版权归原作者所有
AI智能索引来源：http://www.mr2.com/forums/archive/index.php/t-42594.html
点击访问原文链接

AEM - Idle Timing HELP!! [Archive] - Toyota MR2 Message Board

进入原网站 导航首页
AEM - Idle Timing HELP!! [Archive] - Toyota MR2 Message Board Toyota MR2 Message Board > Toyota MR2 Generations > MK 2 MR2 - SW20 > MK2 Stand-Alone EMS and Nitrous Discussion > AEM - Idle Timing HELP!! PDA

View Full Version : AEM - Idle Timing HELP!!


biorchang06-18-2009, 07:42 PMHi out there in AEM land.

So I got my AEM installed and the tuner said I had an oil leak..VC. I replaced the gasket and fixed that, but discovered the distributor was leaking oil as well.

So I sent it off to ATS and they rebuilt it for me.

Installed in the car, but cannot get the car re-timed.

I am trying to follow the AEM guide, go into the ECU and set ignition timing.

I see the degree value is like at 29 and if I set my timing light to the same degree the little white mark is way past the 0 degree hash mark.

No matter where I turn the distributor to..and how I advance or retard, I can't seem to give the car any gas without it stuttering or backfiring...and I can't seem to get the white mark back into the hash marks on the timing cover.

Can someone please help me out here? What am I missing--doing wrong?

I will be glad to PM my phone number or IM for some help.

Thanks!! biorchang07-24-2009, 02:34 PMSo it turned out to be a bad distributor rebuild. Just an FYI to those that were wondering? Powered by vBulletin® Version 4.2.5 Copyright © 2026 vBulletin Solutions Inc. All rights reserved.

智能索引记录