温馨提示：本站仅提供公开网络链接索引服务，不存储、不篡改任何第三方内容，所有内容版权归原作者所有
AI智能索引来源：http://www.mr2.com/forums/archive/index.php/t-30249.html
点击访问原文链接

Detailing your MR2 How to remove corrosion? [Archive] - Toyota MR2 Message Board

进入原网站 导航首页
Detailing your MR2 How to remove corrosion? [Archive] - Toyota MR2 Message Board Toyota MR2 Message Board > General and Racing Discussions > General Technical Discussion > Detailing your MR2 How to remove corrosion? PDA

View Full Version : Detailing your MR2 How to remove corrosion?


Maruki-kun05-23-2008, 10:55 PMhttp://i20.photobucket.com/albums/b213/Ku-sama/MR2/P3180024.jpg


my motor is pretty funky with non grease stuff.... what's the best way to remove this crap without taking anything out of my bay? GR8MR205-31-2008, 11:34 PMI'd start by doing an engine bay cleaning. You might want to do this in the street or pull onto a tarp as the grunge that is released will likely stain the driveway.

Cover any exposed electrical contacts with plastic. Then spray down everything gently with a hose using a fine spray. Next, spray everything with a citrus cleaner. Let it sit for five minutes and rinse with the garden hose. If there are stubborn areas re-spray with the cleaner and agitate with a brush. Rinse well and then blow it out well with an air compressor. Be sure to get as much water out as possible.

Now start the car and let it idle for a few minutes to warm the engine. This should help in the drying process. Don't let the engine get hot for now. When dry, spray everything evenly with CD/2 Engine Detailer. This is an acrylic based spray that dries hard so as not to attract dirt and dust. After an even spray coating everything, restart the engine and let it run for 10-15 minutes to get everything hot. This will set up the acrylic and you will be amazed at how good things now look.

Here is what mine looks like after this process.
http://gallery.mac.com/jfelbab/100083/P6060067/web.jpg

Here is what CD/2 looks like. It's sometimes hard to find but Amazon has it in stock if you can't get it locally.
http://ecx.images-amazon.com/images/I/31G5NV1ETRL._SS400_.jpg Maruki-kun05-31-2008, 11:54 PMI might still use this for the rest of the stuff in the engine, but I got my VC clean and painted :) Powered by vBulletin® Version 4.2.5 Copyright © 2026 vBulletin Solutions Inc. All rights reserved.

智能索引记录