温馨提示：本站仅提供公开网络链接索引服务，不存储、不篡改任何第三方内容，所有内容版权归原作者所有
AI智能索引来源：http://www.mr2.com/forums/archive/index.php/t-1466.html
点击访问原文链接

Project 3.4L 5VZ-FE [Archive] - Toyota MR2 Message Board

进入原网站 导航首页
Project 3.4L 5VZ-FE [Archive] - Toyota MR2 Message Board Toyota MR2 Message Board > Toyota Engine Clubs > V6 Owners Group > Project 3.4L 5VZ-FE PDA

View Full Version : Project 3.4L 5VZ-FE


Node09-06-2005, 12:39 AMFollowing allong the lines of "lets share" here is my setup :D

1996 4runner

* Long block
* fuel injectors
* fuel pressure regulator
* fuel injectors
* Intake manifold
* Primary exhaust manifolds
* Throttle Body
* All engine sensors

1998 4runner

* ECU
* MAF
* Ignitor
* Coil packs

1991 Turbo MR2

* Transmission
* Stage 1 clutch disk
* Stage 1 pressure plate
* Axels and hubs

Cummings turbo diesel

* Turbo F coolent pipe (used as a coolent fill/heater core hose)

Turbochargers

* TDO4-HL mitsubishi 13G Twins
* Volvo Large FMIC mounted in the trunk
* 1989 Supra Turbo BPV vented to atmo
* 1988 AW11 MR2 radiator fan mounted on IC (Temp relay contorlled)
* 1991 MR2 intercooler fan x2 (Trunk IC exhaust)

Additional fuel control for 8+ psi (Not yet opperational)

* URD extra injector kit & water injection controler (to be rigged as an IC sprayer)

http://bulldog.unca.edu/~jmpersek/public_html/dsc_104.jpg

http://bulldog.unca.edu/~jmpersek/public_html/dsc_112.jpg

http://bulldog.unca.edu/~jmpersek/public_html/dsc_006.jpg Powered by vBulletin® Version 4.2.5 Copyright © 2026 vBulletin Solutions Inc. All rights reserved.

智能索引记录